Beer accessories

Turner

Manual stainless steel flipper supplied with a Type “A” or “S” filling head, pressure gauge, fittings, and hoses for liquid (½” diameter) and gas (3/8″ diameter)
  • Easy filling
  • Reduces handling
Possible option: scale for volume control based on weight

forced carbonation kit

Composition:

  • 1 x CO2 regulator
  • 3m x 3/8″ hose
  • 1 x female union 3/8-5/8
  • 1 x 3/8″ smooth shank angle
    + optional filler head

shooters

Beer filler TIR13020
Manual pressure adjustment 1-3 bar
Filler: 1 spout with integrated compressor
Capacity: 30 litres/hour max
Weight: 20 kg
Dimensions LxHxD: 182 x 388 x 488

Beer filler COL25035
Manual adjustment pressure 1-3 bar
Column filler 2 spouts with integrated compressor
Capacity: 50 litres/hour max
Weight: 33 kg
Dimensions LxHxD: 400 x 705 x 428
Beer filler TIR24030
Manual adjustment pressure 1-3 bar
Filler: 2 spouts with integrated compressor
Capacity: 40 litres/hour max
Weight: 30 kg
Dimensions LxHxD: 227 x 468 x 478

Wine filler TIR13022B
Automatic pressure adjustment 2.7 bar
Filler: 1 spout with integrated compressor
Capacity: 30 litres/hour max
Weight: 22 kg
Dimensions LxHxD: 291 x 460 x 372

PICNIC pump
Filler: 1 spout
Operation: manual pump
Dimensions WxHxD: 291 x 460 x 372 mm
No cooling system
Operates without electricity or gas

Compressor for filler
Pressure setting: 0-3 bar
Capacity: 40 litres/hour max
Weight: 3kg

filler sanitation kit

Composition:

▪ 1 x Ecofass 10L drum

▪ 1 x plunger with type “A” or “S” head

▪ 10 x sachets of alkaline product (+technical data sheet?)

Tamper-evident capsules

Available colors :

  • white,
  • yellow,
  • brown,
  • green,
  • red.

Clamping bell

ECOFASS barrel clamp with aluminum insert compatible with standard ½ inch square male wrench. Enables safety tightening of the top nut and ensures watertightness of the assembly.

Important! Barrel must be depressurized before loosening.

Compressed air is used for filling between 1.8 bar minimum and 2 bar maximum.

Imperative: before disassembly, strike the filling head, empty the bag if not already emptied, and let the air or CO2 escape on the air side.

Do not store an empty drum under pressure – Depressurize the drum as soon as it is returned.

TAKE CARE TO REMOVE THE AIR-SIDE NON-RETURN SEAL

The nut can then be unscrewed and the pocket + head assembly removed.